MaXpray M1 Airless Paint Sprayer, Highly Efficient Thinning-Free Minimal Overspray for Up to 10 Gallon DIY Painting Projects Home Interior & House Exterior, Comes with Sprayer Accessories

Bought this sprayer to paint a large backyard block wall and to stain a very long retaining wall. I've never owned a sprayer but did my research for several weeks. I had no idea what to expect, but WOW have I been pleasantly surprised! with this unit. Very easy to use IF you follow the instructions. Covers very well using both paint and stain. Cleanup is not bad and gets much easier after a couple times (like after I knew what I was doing). Not the sprayer's fault. The unit is VERY complete with all the tools and pieces you'll need to assemble, operate and clean your airless sprayer... except one - an adjustable wrench. It is priced very well, high quality unit and light weight making it easy to move around. Nice long sprayer hose, also. I would recommend this sprayer to anyone not wanting to use a paint brush or end up with an aching back!

When I was finishing my basement, I needed a lot of painting to be done. I contemplated hiring a painter, and renting a sprayer. I ultimately ended up taking a leap of faith and purchased a sprayer. It was way more economical and gave me a lot of flexibility on my time line. This was my first go at painting with a sprayer. I used this sprayer to paint my unfinished ceiling black. This machine made it very easy. It is very user friendly and forgiving. I used it with 1 gallon and 5-gallon containers without missing a bit. It is very sturdy and durable. I will admit that the sprayer hose gets very rigid due to the pressure in the hose. As with all paint sprayers, clean up is dreaded and takes a bit of time. I have got it down to about 10 minutes now and it extends the life of the sprayer. I did not strain any of the paint prior to running it through the sprayer and did not experience any clogs.I learned that when using the sprayer, you lose about 1 gallon for every five gallons. By loose I mean you are unable to run it through the sprayer at that point. I planned for it and it worked out great by pouring the left over paint from the 5-gallon bucket into a gallon can, combing used 1 gallons cans, and/or using the residual to do touch ups. It was perfect.This sprayer is perfect for beginners. It requires low maintenance, easy to use/apply paint, relatively easy clean up and cost efficient. I highly recommend this sprayer. It saved me a lot of time and money.

Got this and was all set up to paint, attempted to prime the sprayer but wouldn’t prime. Did all the trouble shooting steps still no good so had to return, thought with all the good reviews I was safe but not this time. Perhaps I was just the lucky one who got a lemon.3/09/25 update:after contacting the seller a replacement unit was sent and the new one works great, seller was awesome to work with thanks again!

This item works great. You will have to make sure the spray tip ot properly installed. And make sure you don't let the paint thicken or dry in the machine. I painted my 2 story house in 3.5 hours with no runs streaks or touch ups needed. I recommend this to people that will use it a lot.

I am impressed with the quality of this sprayer. I purchased this primarily for painting the exterior of a recently purchased shipping container. I'm certainly not a professional painter and have done some DIY spray painting in the past. This unit made it a breeze. The instructions for set up, use and cleaning were simple to follow. The sprayer worked flawless and it took no time to spray the container. If I never use the sprayer again, it saved me a ton of money, as compared to hiring a professional painter to do the job.

Well, I finally took the chance and ordered the sprayer (M1). After setting it up, there is absolutely no suction to get the paint into the sprayer. I have spent over an hour going through all of the possible solutions, none of which worked.Edit: 4 hours later: I finally got the sister working. The ball was stuck and I could not dislodge it, so I filled the space with WD-40 and that did the trick.It finally started spraying paint. In addition to out of the nozzle, it also sprayed in several other places, and yes, I tightened everything that could be tightened.At the end of it, the amount of catharsis I received from throwing the sprayer in the trash can well exceeded any I would have gotten from a refund.I stand by my recommendation of looking elsewhere for a different sprayer.Unfortunately for me, I just opened the box to use it 2 months after I purchased the sprayer, so I'm past any return window. That's on me, and I can accept that. What I can't accept is a sprayer that simply does not spray.So now my best advice is to look elsewhere for a sprayer that works.

It works great, and it's fun to use. You save a tremendous amount of time on big jobs vs. rollers or brushes. I would definitely recommend it.

I haven't used it yet it's what I'm looking for ...It looks pretty nice I'll let you know 😉