2Set 8dBi 2.4GHz 5GHz Dual Band Wireless Network WiFi RP-SMA Male Antenna + 20cm IPEX to RP-SMA Female Pigtail Cable for NGFF Wireless Card & M.2 (NGFF) 3G/4G Card

For the set and prime delivery these were not much more than ebay offerings. MHF4 connectors are tiny and so the cables are pretty delicate. So take your time with these.The mounting and antennas are solid however, installation very simple.I bought this kit to go with the intel AX200 wifi card, which I used to upgrade my old generic 802.11n wifi card only cable of upto 150Mbs.The upgrade was very siginificant I can only use up to 802.11AC Wave 2 now and not AX (Wifi 6) yet as don't have a router that supports it yet. But my latency in games always beats those with Powerline ethernet adapters.Previosuly I would be 40-50ms and now 5 - 15ms. I know this is subject to your household and indvidual setup, for example if you have internal brick walls or are a very long distance away then you would probably opt for powerline ethernet. But there's no doubt an improvement from 802.11n to AC which im sure many gamers could benefit from. For a total cost of between £20 and £30.

I overly forced one of them, and had to bend the connector back into shape, but that was my mistake and easily rectified. The cables were only just long enough to reach the back of my micro form factor DELL case though, so any larger and you may need longer cables

I'd bought the Intel AC9260 to add wireless capability to a desktop PC I was building, but it really needed an antenna to make the signal stronger and more reliable. This was the ideal item for the job and does it perfectly.However, it's not the easiest thing to install. The clips for the antenna are really tiny and almost impossible to see. I ended up having to line them up as best as I could and then crimping them in place with a pair of needle nose pliers to ensure they snapped into place, but this has its own issues as the inner pin is so fine, it could bend. Luckily, that didn't happen.Also, it comes with no backplate, so I had to improvise, using a couple of cut-outs on the back of the PC. You'll also need a couple of spanners to make sure this is really tight - I didn't have two of this small size, so I opted for one and the aforementioned pliers, but it kept working loose. It's almost spot on now and, once the box is in situ, it probably won't be an issue, but it's not ideal.But, all that said, once all the hassle of installing is done, they are really good.

Bought this to utilise the built in Bluetooth and Wifi module on my Nuc8 Motherboard whilst fitted in an Akasa Turing silent case.Plenty of room for the cables to rout into the openings and the antennas are providing good wifi and Bluetooth signal.Slightly awkward to fit due to the tiny connectors on the Nuc but once they're on, they seem to be nice and snug.

The description is wrong, hence lower stars. I am sure it works fine for WiFi, but it turned out I needed longer pigtails.The antenna has a hole (female) and the pigtail connector has a pin (male); the description is the opposite.Check this before mixing this with other parts. Ex: the "frequently bought together" pigtail item WILL NOT fit to this, because the sma connectors are differentFYI, if you have an ASRock Pro4 B550M board, the pigtails ARE NOT long enough and you need minimum 25cm pigtail leads for the m2 wifi slot.If you are having difficulty fitting the ipex connector with your fingers, use a flathead screwdriver to GENTLY press down on the connector. It will click in if you have centralised it properly.

Does what it's supposed to do. The board connectors are microscopic of course so it's a pain to connect. Excellent value.

The tiny connectors that connect to the wireless card just won't go on. I've spent over an hour trying to get them fitted without success. I've seen in other reviews that mention the connectors might be deformed but unfortunately my eyesight isn't quite good enough to check mine.The connectors on the old case fit with ease but unfortunately can't be transferred to the new case otherwise I'd be using them instead.If I ever get these to connect I'll update the review but until then be aware that you may have a struggle getting them connected.Update: I bought another set from a reputable supplier. It cost a couple of quid more but both clipped into place on the first try. Quality counts and these are obviously not quality.

OK quality and fits my akasa turing perfect. There have been comments on how the antenna do not fit the sockets but they do fit perfectly.You need to align them.There is also some talk about it being poor signal etc. From the tests i did on the wires i can tell you there is nothing wrong with them. The antenna are also working as expected and the only thing which might be causing poor signal is something other than the antenna, maybe case, power etc.No issues here

Je cherchais un nouveau disque dur et par hasard j'ai vu que l'emplacement M.2 E key (le E de "E" key correspond à l'emplacement de l'encoche !) sur ma carte mère MSI Gaming plus Z390 était disponible. J'avais un dongle bluetooth qui occupait un port USB et pas de Wifi ... Et comme la carte Intel® WLAN AC 9560 M.2 vPro Bulk faisait le deux c'est top, j'ai donc commandé cette carte. Une fois installée, windows 11 l'a reconnue tout de suite et a installé le pilote du wifi puis le pilote du BT. Par contre, pas de signal car je n'avais pas d'antennes...Donc nouvelle commande... et une fois que j'ai installé ces antennes qui sont juste à clipser sur la carte elle même avec deux minuscules clips tout a bien fonctionné sur aucune autre manipulation logicielle.Les débit sont excellents avec un répéteur wifi de free et la fibre (environ 500mb/s en montant et descendant).J'espère que cela va aider !Bien à vous

es dauert etwas, bis man das Kabel mit dem female Pin auf den male Pin der Intel 9260 WLAN M.2 Karte gesteckt bekommen hat - 99 x ohne Erfolg, aber dann sitzt es bombenfest. Gutes Material, auch die Schrauben. WLAN ist nun superschnell. TOP Empfehlung. Den Bluetooth Pin habe ich nicht an das Kabel angeschlossen, brauche ich nicht und mein PC hat nur ein Antennen-Loch. Auf kurze Distanz erkennt BT aber alle Geräte.

He usado estás antenas para conectar en una Intel Wireless-AC 9560NGW, y todo correcto.El wifi y el bluetooth van de maravilla, cobertura al máximo.El producto es tal y como se describe.El envío rápido, dentro del plazo establecido.

Pues eso, tienes que tirarte un rato para que los cabezales de los cables entren en los 2 enganches de la tarjeta wifi. Yo lo conseguí utilizando el extremo de la base de unas pinzas. Al final entran, pero hay que tener cuidado de no cargarte los propios cables que son muy finos o doblar la chapa de los conectores. Una vez puestos y atornilladas las roscas al backplate quedan fijos sin problema. La recepción entiendo que es correcta, no he usado anterioremente antenas de este tipo, así que no puedo comparar.

Acheté pour un NUC7i5 installé dans un boitier fanless AKASA. Ces antennes remplissent parfaitement leur rôle, excellente réception Wi-Fi.Attention, comme le commentaire précédent j'ai cru ne pas avoir reçu le bon modèle de connecteurs M.2 NGFF. Il faut bien aligner et forcer plus qu'avec les connecteurs d'origine pour les connecter sur la carte wireless.